Thermal insulation coatings
Only 1 millimeter coating thickness replaces even 50 mm mineral wool or styrofoam. Solves the problem of thermal insulation for houses, buildings, apartments, vehicles, vessels, tanks, pipelines, or plants!
Liquid thermal insulation coatings
Uninsulated walls cause 30-50% higher energy consumption for heating. Insulate your space with new, high-tech microceramic thermal insulation coatings.
It's applied like paint, acts like a thermal barrier! After polymerization, the coating looks like a matte flexible film and has unique thermophysical properties. 1 millimeter coating thickness replaces even 50 mm mineral wool or styrofoam.
Prevents heat loss and condensation, protects against corrosion, and provides protection from burns for hot water pipes and equipment.
If you want to solve the thermal insulation problem for a house, cottage, building, apartment, vehicle, vessel, tank, pipeline, or plant – be sure to inquire and see that thermal insulation coatings are the best solution!
Packaging and Modifications
Most thermal insulation coatings are available in 5, 10, and 20-liter packages.
There are also so-called NG (non-combustible) modifications! In these modifications, the material transitions from the difficult-to-combust category to a completely non-combustible material. The packaging and appearance of the material remain the same as the standard version.
The image shown on the right was taken under a microscope and displays hollow microspheres that are present in all Bronya thermal insulation coatings and possess exceptional thermal insulation properties!
General information on Bronya insulating coatings
Bronya ultrafine thermal insulation, or thermal insulation coatings, can be applied to almost any substrate. After polymerization, the coatings look like a matte, flexible film and have unique thermophysical properties. A 1 mm layer of Bronya thermal insulation coating is thermally equivalent to 50 mm of mineral wool or 50 mm of expanded polystyrene (Styrofoam). It prevents heat loss and condensation, provides corrosion protection, and protects against burns.
Bronya's finest thermal insulation is very effective for the thermal insulation needs of facades, roofs (where it absolutely eliminates ice dam formation), interior walls, window frames, hot and cold water pipelines, steam pipes, chimneys, various tanks, trailers, ships, etc. Bronya ceramic thermal insulation can be used at temperatures from -60 °C to +200 °C (some types even up to 260 °C for a short period).
Advantages of Bronya Thermal Insulation Coatings
Cold protection
- reduces building heating costs by up to 30%
Overheat protection
- reflects 60-80% of heat
Soundproofing
- A coating layer of only 0.6 mm thickness reduces noise levels by up to 2 dB
Waterproofing
- Latex, which is part of the coating composition, ensures low moisture absorption, not exceeding 0.03 g/m3
Ecological acceptability
- Water-based coatings are an environmentally friendly material - they do not contain toxic or harmful ingredients
Fire Safety
- Thermal insulation boards in the standard version fall into the category of difficult-to-ignite products
- Bronya NF versions (Classic NF, Facade NF, Light NF) are classified as non-combustible products.
Corrosion inhibition
- resistance to extreme weather conditions
Color customization
- varnishes can be used with pigments
- Standard paints can be applied to the coatings
Wide application temperature range
- application in the range of -60 °C to +200 °C, and in a shorter interval up to +260 °C (Bronya Classic)
- can be applied to hot surfaces up to +150 °C, as well as to extremely cold surfaces down to -30 °C (Bronya Winter, Bronya Nord)
Ease of application
- with a brush
- with a compressor
- with a rubber butterfly clasp
Retains thermal insulation properties for a long time
- minimum 15 years for exterior surfaces
- minimum 25 years for interior surfaces
Saving
- over 30% compared to classic insulation with styrofoam and mineral wool
Thermal insulation coatings
Bronya Classic & NG - Applied like paint, works like a thermal barrier!
Bronya ceramic thermal insulation is a high-performance material for thermal insulation of exterior and interior walls, roofs, door frames, window frames, concrete floors, hot and cold water pipes, steam pipes, ventilation and air conditioning ducts, refrigeration units, storage tanks, trailers, refrigerated trucks, etc. It withstands temperatures from -60°C to +200°C (and up to +260°C for short periods (1-2 hours)). It is applied to prevent condensation on cold water pipelines and to prevent heat loss in heating systems.
Bronya Facade & NG - Apply to the surface in layers 1 mm thick!
Liquid ceramic thermal insulation that can be applied in single layers of 1mm thickness while maintaining vapor permeability. This is the first liquid thermal insulation that can be applied to building walls and facades. It can be used to insulate walls made of various materials – concrete, brick, wood, etc.
Bronya Light & NG - Levels the surface and insulates!
Liquid ceramic thermal insulation with several functions: it levels the surface, provides thermal and acoustic insulation, prevents the formation of mold and condensation on building structure joints, and acts as a separating layer for Bronya Facade, Bronya Classic, or Bronya Anticor coatings from materials that would degrade their thermophysical properties.
Bronya Anticor - Directly on the rust!
The first and only thermal insulation material that can be applied directly to a rusted surface. It is sufficient to remove loose rust particles with a wire brush; after that, apply Bronya Anticor thermal insulation according to the attached instructions. Bronya Anticor liquid thermal insulation is a high-performance coating: in addition to thermal insulation, it also possesses strong anti-corrosion properties. In all other technical characteristics, requirements, and usage, it is identical to the basic Bronya Classic coating. The use of Bronya Anticor thermal insulation material on existing facilities and pipelines significantly reduces operating costs because no special surface preparation is required for its application, nor is it necessary to shut down operations to carry out the work.
Bronya winter & NG - For extreme cold!
Material that can be worked with at temperatures down to –35 °C. Bronya Winter is the latest development in the line of ultra-fine ceramic insulating coatings. Bronya Winter can be applied at freezing and positive temperatures from –30 °C to +30 °C. Bronya Winter thermal insulation consists of special acrylic polymers and hollow, vacuum-sealed ceramic microspheres, fire retardants, rheological agents, and inhibitors.
Bronya Anticondensate - Prevents further condensation
Solution for condensation on metal, glass, plastic, and other surfaces. Prevents moisture buildup and the formation of condensation, which accumulates on surfaces covered with condensation. Condensate negatively affects equipment safety and is present in industrial, administrative, and office spaces, therefore, with this coating, you extend the lifespan of equipment.
Bronya VibroHydroPlast
A liquid one-component material with vibration damping, sound absorption, and waterproofing properties. The material has the highest chemical and mechanical resistance, excellent elasticity, and durability. It is produced on the basis of a synthetic rubber polymer with the addition of solvents, functional additives, and a high-expanding nanogel. It protects surfaces from exposure to water and chemicals.
Bronya TermoHydroPlast - For waterproofing, vibration and sound resistance
High-quality rubber coating with waterproof and thermal insulation properties. Protects surfaces from exposure to water and chemicals. This liquid, one-component mixture is based on synthetic rubber polymer with added solvents, functional additives, and hollow microspheres. It is designed for waterproofing and thermal insulation of various surfaces that are resistant to light. Developed for application at ambient temperatures from -25 °C to +35 °C. Intended for thermal insulation and waterproofing.
Bronya Gracia & NG - Aerogel Dust
It has good adhesion to almost all known materials. When applied to vertical surfaces, there is practically no deformation. Excellent and easy to apply. Mechanically mixes quickly. Thermal insulation work can be carried out at surface and ambient temperatures from +15°C to +70°C.
Bronya Light Airless Nord & NG - For construction and finishing works
Bronya Light AirLess Nord insulating coating is an innovative material for construction and finishing works. It has been developed for the final leveling of internal and external surfaces of concrete, brick, cement-lime plaster, gypsum blocks and panels, aerated concrete, drywall, and other surfaces at temperatures from -60 °C to +150 °C.
Bronya Light Nord & NG - For construction and finishing works
Bronya Light AirLess Nord insulating coating is an innovative material for construction and finishing works. It has been developed for the final leveling of internal and external surfaces of concrete, brick, cement-lime plaster, gypsum blocks and panels, aerated concrete, drywall, and other surfaces at temperatures from -60 °C to +150 °C.
Bronya Light Airless & NG - For construction and finishing works
Bronya Light AirLess Nord insulating coating is an innovative material for construction and finishing works. It has been developed for the final leveling of internal and external surfaces of concrete, brick, cement-lime plaster, gypsum blocks and panels, aerated concrete, drywall, and other surfaces at temperatures from -60 °C to +150 °C.
